If you are storing it long-term, make sure it’s tucked away in a safe or locked area that is dry and free of moisture. This great video below goes into how to fully strip down the Glock. Pay special attention to the removal and assembly of the pins, since there is a correct rockstar strip club order. We clean everything with our M-Pro 7 and oil the moving parts. Oil the rails of the frameAlso, add a bit of lube to the raised metal part in the rear of the frame that interfaces with the trigger bar. Just a touch of lube on the slide rails, 1 drop per side.
It’s the easiest to clean, just simply wipe it down with the rag. If there’s persistent gunk, a nylon bristle brush can be used to remove any buildup. Empty the magazine and remove all ammunition from the room. With the slide locked back, visually check several times that the gun is unloaded and no ammunition is present in the chamber or magwell. The first step in cleaning any gun is to make sure it is unloaded and all ammunition is stored away from the cleaning area for the remainder of the cleaning process.
Make sure you remove all ammunition and lock it in the safe before you start cleaning. 【Easy to Use】—We have size label both equally on slotted guidelines and bronze brushes. It is extremely handy to find the corresponding size.
Apply some cleaner to all the metal parts inside the frame. Use a cloth or brush to spread it around so all the dirty areas are coated with the cleaner. Basically we are going to apply some gun cleaner to each part and let it sit for 5 minutes or so. Then we will clean it off with a cotton cloth.
Luckily, all Glocks break down the same way so no matter which model you’re sporting you can follow along with these procedures. First thing’s first, we need to lay out our tools to get the job done. The barrel length of the Glock 17 is at 4.5 inches and measures 8 inches long on overall. The 19 model, on the other hand, has a shorter barrel at just 4 inches. Capacity wise, the 17 model can hold up to 17+1 rounds of size 9mm and stands 5.43 inches tall. I may earn a small part of the sale from links to any products or services on this site.
Unlike getting the rails of your pistol good and coated, lubrication should be minimal with magazines. Some people don’t even use it; they just get their magazines clean and call it good. Since WD-40 is primarily a solvent it seems to make sense that it would be ideal for cleaning guns. However, cleaning your guns with WD40 is NOT advisable.